Torque Solution Front Inner Control Arm Bushings for Evo 7/8/9/X (TS-EV8-117) Scat Pro Included is a stiffer spring

Included is a stiffer spring to help keep the valve closed at idle to prevent stalling and backfiring

Normal Current (amps): 12

• This is only confirmed for USDM models

If you use a 14mm wrench to remove your drain plug

• Integrated -4 AN water cooling ports that cycle a small amount of coolant through the actuator top to keep the temperatures down in extreme conditions such as road racing

Torque Solution Front Inner Control Arm Bushings for Evo 7/8/9/X (TS-EV8-117) Scat Pro Included is a stiffer springThese Torque Solution front inner control arm bushings replace the inner rubber material that can deteriorate and fail over time, leaving you with a sloppy suspension. Fits Evo 7 8 9 and Evo X. See images for exact placement. Made from 75a durometer polyurethane with a center steel sleeve. These give you improved traction and reduced wheel hop without too much vibration. Includes two mounts for each control arm. You only need to purchase one kit for